FS106P

Name: Cudy FS106P
Brand: Cudy
SKU: FS106P

6-port 10/100 PoE switch

A 6-port Fast Ethernet (10/100) switch with 6 PoE ports. It powers IP cameras, access points and phones over the same cable that carries data.

Overview

A 6-port Fast Ethernet (10/100) switch with 6 PoE ports.

It powers IP cameras, access points and phones over the same cable that carries data.

We handle supply, setup and Wi-Fi coverage planning.

Interfaces
10/100 Mbps RJ45 Ports	6
10/100 Mbps RJ45 PoE Ports	#1~#4
Max Power on a Single PoE Port	30W
PoE Port Notes	The PoE ports comply with IEEE 802.3at/af standards.
PoE Priority	Intelligent Power Management: Automatically disconnect the lastly powered device when power exceeds budget.
Extend Mode Ports	#1~#4
VLAN Mode Ports	#1~#4

Buttons and LEDs
LED	Power Link/ACT of Each Ethernet Port Extend Status VLAN Status
Physical Buttons	VLAN/Default/Extend DIP Switch
Physical Buttons Note	The PoE Watchdog is on under the VLAN/Extend modes and will attempt to reboot the plugged-in but inactive client.

Performance
Max Copper Speed and Distance	Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note	250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
MAC Address Table	2048
VLANs	2048
Max Switching Capacity	1.2 Gbps
Max Forwarding Rate	0.8928 Mpps
Jumbo Frame	2 KB
Packet Buffer	570 Kbit

Switching
802.3 Protocols	802.3i 10BASE-T 802.3u 100BASE-TX 802.3x Flow Control 802.3af PoE 802.3at PoE
Ethernet	Full Duplex Half Duplex (CSMA/CD) Auto-Negotiation Auto MDI/MDIX
Forwarding Method	Store-and-Forward

Reliability
MTBF	>200,000 h
EMS	IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 4kV
Environment	Operating Temperature: 0~40 ℃ (32~104 ℉) Storage Temperature: -40~70℃ (-40~158 ℉) Operating Humidity: 10~90% non-condensing Storage Humidity: 10~95% non-condensing