FS1018PS1

Name: Cudy FS1018PS1
Brand: Cudy
SKU: FS1018PS1

16-port 10/100 PoE switch

A 16-port Fast Ethernet (10/100) switch with 16 PoE ports. It powers IP cameras, access points and phones over the same cable that carries data.

Overview

A 16-port Fast Ethernet (10/100) switch with 16 PoE ports.

It powers IP cameras, access points and phones over the same cable that carries data.

SFP slots take fiber uplinks.

We handle supply, setup and Wi-Fi coverage planning.

Interfaces
1.25G SFP Slots	1
Gigabit RJ45 Ports	2
10/100 Mbps RJ45 Ports	16
10/100 Mbps RJ45 PoE Ports	#1~#16
Max Power on a Single PoE Port	30W
PoE Port Notes	The PoE ports comply with IEEE 802.3at/af standards.
PoE Priority	Intelligent Power Management: Automatically disconnect the lastly powered device when power exceeds budget.
Shielded RJ45 Port	Yes
Extend Mode Ports	#9~#16
VLAN Mode Ports	#1~#16

Buttons and LEDs
LED	Power Link/ACT of Each Ethernet Port PoE Max Status
Physical Buttons	Extend On/Off VLAN On/Off PoE Watchdog On/Off
Physical Buttons Note	The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature.

Performance
Max Copper Speed and Distance	Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 100 meters at Gigabit Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note	Gigabit speed is only available on the uplink ports. 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
Optical Spec and Distance	Depends on the Installed Optical Module
MAC Address Table	2048
VLANs	2048
Max Switching Capacity	9.2 Gbps
Max Forwarding Rate	6.844 Mpps
Jumbo Frame	2 KB
Packet Buffer	2 Mbit

Switching
802.3 Protocols	802.3i 10BASE-T 802.3u 100BASE-TX 802.3ab 1000BASE-T 802.3z 1000BASE-X 802.3x Flow Control 802.3af PoE 802.3at PoE
Ethernet	Full Duplex Half Duplex (CSMA/CD) Auto-Negotiation Auto MDI/MDIX
Forwarding Method	Store-and-Forward
PoE Management	Intelligent Power Management

Reliability
MTBF	>200,000 h
Grounding Methods	Three-Prong Plug Grounding Point
EMS	IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 4kV
Environment	Operating Temperature: 0~40 ℃ (32~104 ℉) Storage Temperature: -40~70℃ (-40~158 ℉) Operating Humidity: 10~90% non-condensing Storage Humidity: 10~95% non-condensing

Mechanical
Dimension	270×182×44 mm 10.63×7.17×1.73 inches
Product Weight	1226.9 g (43.28 oz.)
Casing Material	Metal
Installation	Desktop Rackmount via Brackets