AP3000
AX3000 Wi-Fi 6 access point
AX3000 Wi-Fi 6 wall-mount access point
An AX3000 dual-band Wi-Fi 6 wall-mount access point. Supports mesh links between access points.
An AX3000 dual-band Wi-Fi 6 wall-mount access point.
Supports mesh links between access points.
We handle supply, setup and Wi-Fi coverage planning.
| CPU Details | 1.3 GHz Dual-Core CPU |
|---|
| Flash/ROM | 128 MB (1 Gbit) NAND |
|---|---|
| DDR/RAM | 256 MB (2 Gbit) DDR3 |
| 5 GHz Wi-Fi Speed | 2402Mbps |
|---|---|
| 2.4 GHz Wi-Fi Speed | 574 Mbps |
| 5 GHz Wi-Fi Streams | 2 Spatial Streams with 3T3R |
| 2.4 GHz Wi-Fi Streams | 2 Spatial Streams |
| Wi-Fi Antennas | 3× Internal |
| FEM or PA/LNA | 5 GHz: 3× Internal, 2.4 GHz: 2× Internal |
| Beamforming | Yes |
| Range Performance | Max: 80 m (262 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
| Wall Performance | Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') |
| 2.5G RJ45 Ports | 1 |
|---|---|
| Gigabit RJ45 Ports | 1 |
| Ethernet Notes | ETH0 supports PoE powering |
| LED | System |
|---|---|
| Physical Buttons | Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi) |
| Power Input Type | PoE via Ethernet Port |
|---|---|
| Power Methods | 802.3at/af PoE Passive PoE |
| Power Input | PoE on ETH0: 802.3at/af Passive PoE on ETH0: 48V⎓ |
| Max Power Consumption (W) | 14W (PoE) |
| Idle Power Consumption (W) | 5W |
| Advanced | Hardware Watchdog |
|---|---|
| EMC | ESD: Contact: 4kV; Air: 8kV |
| Environment | Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing |
| Certifications | FCC, CE |
|---|
| Installation | Wall-mount |
|---|---|
| Dimension | 86×86×43 mm 3.39×3.39×1.69 inches |
| Product Weight | 178.2 g (6.29 oz.) |
| Retail Package Weight | EU: 252.1 g (8.89 oz.) |
|---|---|
| Retail Package Dimension | 91×57×89 mm 3.58×2.24×3.5 inches |
| Carton Net Weight | EU: 12.6 kg (27.78 lbs) |
| Carton Gross Weight | EU: 13.3 kg (29.32 lbs) |
| Carton Dimension | 47.3×31.2×20.4 cm 18.62×12.28×8.03 inches |
| Compatible Products | C200P 1.0, C500P 1.0 |
|---|---|
| Compatible Accessories | POE200H 1.0, POE48-18W 1.0 |
| Note | Choose with caution: some suggested models may not deliver speeds that match the device’s maximum capability. |
| Wi-Fi Standards | Wi-Fi 6 |
|---|---|
| Max Wi-Fi Modulation | 1024-QAM |
| Wi-Fi Efficiency | OFDMA MU-MIMO BSS Color |
| Max Capacity | 256 |
| Recommended Client Upper Limit | 60 |
| Wi-Fi Channel Width | Auto/20/40/80/160 MHz |
| Wi-Fi Security | WPA/WPA2/WPA3 |
| Multi-SSID (Max Number) | 8 SSIDs (Up to 4 SSIDs on each band), VLAN Support |
| Operation Modes | Access Point |
|---|---|
| Mesh | Cudy Mesh |
| Mesh Backhaul | Wireless Backhaul Wired Backhaul |
| Multi-Band Backhaul | Yes |
| Multi-AP Management | Via Cudy AP Controller |
|---|---|
| All Devices Management | Wi-Fi Time Schedule |
| DHCP | Server |
|---|---|
| IP Versions | IPv4 |
| IGMP | IGMP Snooping |
| Wake on LAN | Yes |
|---|
| LED Control | Yes |
|---|---|
| Local Control Method | Config Web Page App Control |
| Remote Control Method | Config Page via HTTPS App Control |
| Firmware Upgrade | Local Update App (Over the Air) Online Update |
| Reliability | Timed Reboot Backup and Restore |
| Diagnostic Tools | Diagnosis Ping Traceroute NSLookup System Log |