AP1300 Wall

Name: Cudy AP1300 Wall
Brand: Cudy
SKU: AP1300 Wall

AC1200 Wi-Fi 5 wall-mount access point

An AC1200 dual-band Wi-Fi 5 wall-mount access point. Supports mesh links between access points.

Overview

An AC1200 dual-band Wi-Fi 5 wall-mount access point.

Supports mesh links between access points.

We handle supply, setup and Wi-Fi coverage planning.

CPU
CPU Details	880 MHz Dual-Core CPU

Memory/Storage
Flash/ROM	16 MB (128 Mbit) NOR
DDR/RAM	128 MB (1 Gbit) DDR3

Wireless
5 GHz Wi-Fi Speed	867 Mbps
2.4 GHz Wi-Fi Speed	300 Mbps
5 GHz Wi-Fi Streams	2 Spatial Streams
2.4 GHz Wi-Fi Streams	2 Spatial Streams
Wi-Fi Antennas	2× Internal
FEM or PA/LNA	5 GHz: 2× Internal, 2.4 GHz: 2× Internal
Beamforming	Yes
Range Performance	Max: 80 m (262 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions.
Wall Performance	Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'')

Interfaces
Gigabit RJ45 Ports	5
Ethernet Notes	ETH0: PoE In, LAN1: PoE OUT* (*See Power Section)

Buttons and LEDs
LED	System
Physical Buttons	Reset Button, LED On/Off Button (Configurable to control LED and Wi-Fi)

Power
Power Input Type	PoE via Ethernet Port
Power Methods	802.3at/af PoE Passive PoE
Power Input	PoE on ETH0: 802.3at/af Passive PoE on ETH0: 48V⎓
Power Output	PoE on LAN1: PoE Passthrough (Similar to Passive PoE the output voltage equals the input voltage range 42.5–57V)
Max Power Consumption (W)	12W (PoE)
Idle Power Consumption (W)	4W
Max Power Output (W)	13.5W
Note	The PoE output requires a 802.3at or higher PoE input and must be enabled on the configuration page.

Reliability
Advanced	Hardware Watchdog
EMC	ESD: Contact: 4kV; Air: 8kV
Environment	Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 95% non-condensing

Certifications
Certifications	FCC, CE

Compatibility
Compatible Products	C200P 1.0, C500P 1.0
Compatible Accessories	POE200 2.0, POE300 2.0, POE400 2.0, POE350 2.0, POE200H 1.0, POE400X 2.0, POE350 3.0, POE400 3.0, POE300 3.0, POE52-30W 1.0, POE48-18W 1.0

Wireless
Wi-Fi Standards	Wi-Fi 5
Max Wi-Fi Modulation	256-QAM
Wi-Fi Efficiency	MU-MIMO
Wi-Fi Efficiency Note	MU-MIMO available on 5 GHz
Max Capacity	128
Recommended Client Upper Limit	40
Wi-Fi Channel Width	Auto/20/40/80 MHz
Wi-Fi Security	WPA/WPA2/WPA3
Multi-SSID (Max Number)	8 SSIDs (Up to 4 SSIDs on each band), VLAN Support

General
Operation Modes	Access Point
Mesh	Cudy Mesh
Mesh Backhaul	Wireless Backhaul Wired Backhaul
Multi-Band Backhaul	Yes

Management
Multi-AP Management	Via Cudy AP Controller
All Devices Management	Wi-Fi Time Schedule

Utilities
Captive Portal	Yes
Captive Portal Authentication	No Authentication, Local Password, External Portal Server
Captive Portal Providers	HotspotSystem, Iron Wi-Fi, ObiFi, Vulacoin, WorldSpot.net, WiFiMAX, Manual
Wake on LAN	Yes

System
LED Control	Yes
Local Control Method	Config Web Page App Control
Remote Control Method	Config Page via HTTPS App Control
Firmware Upgrade	Local Update App (Over the Air) Online Update
Reliability	Timed Reboot Backup and Restore
Diagnostic Tools	Diagnosis Ping Traceroute NSLookup System Log